Tile and Grout Cleaning

TILE and GROUT CLEANING



Tile and grouts very easy collect dirt, grime and spills, often discoloring the surface. Cleaning tile and grout by hand is a very hard work and it is impossible to achieve results like CSCT professionals can do with our state of the art tile and grout truck-mounted steam cleaning equipment.

Most tile and grout cleaners rely on high water pressure to clean hard surface flooring. These floor cleaning methods can be inefficient and, in some cases can actually damage your tile and grout flooring!

At CSCT we have all the professional chemicals, specially designed for each type of tile floor you might have along with the grout. Our professional tile and grout cleaning service with hot water extraction/vacuum combination will make your tile and grout floors look like new again.

Our Cleaning Process:

Step 1: Pre-Inspection

We will visually inspect your tile floor to identify potential stains and give you an evaluation of expected results with no surprises.

Step 2: Furniture moving (optional)

By customer request we can carefully move your sofas, chairs, tables and smaller items from the cleaning areas. Beds, dressers, sectional sofa, and heavier pieces are left in place under our regular pricing structure. Your furniture will be moved with furniture glides and well protected with disposable foam or plastic tabs as needed at job site.

Step 3: Pre-Spray Treatment

A tile and grout cleaning agent is applied to break down traffic areas and pre-treat various types of spots. This will increase chances of soiled traffic areas & spots to be extracted for a more efficient thorough steam cleaning.

Step 4: Brushing & Agitation

Each steam cleaning job is different depending on soil level of tile and grout. If needed our technician will brush the tile and grout with a rotary brushing/agitation mashine to break down the soiling.

Step 5: Soil Extraction and Rinse

The tile floor is then thoroughly rinsed with our state of the art truck mounted hot water extraction machine that removes the soil and sticky residue.

Step 6: Grout Sealant and Protector (optional)

Upon customer request, after the cleaning we can apply a finishing coat of our specially designed grout sealant to create a protective barrier against spills and permanent stains. We recommend to re-apply grout sealant and protector after each steam cleaning.

Step 7: Speed Dry (optional)

High velocity air movers are placed immediately after steam cleaning to promote faster drying. Also, proper drying can be achieved by ventilation, heating, air conditioning.

Step 8: Post Cleaning Inspection

Our technician will walk through your home with you to point out the cleaning results to make sure that you are completely thrilled with the job.


A room up to 250 square will take about 40 to 60 minutes to steam clean. If you choose to include sealant, it might take an extra hour to complete the job. We recommend waiting up to 1 hr before walking on the tile and try to avoid any liquid spills up to 24 hours for sealant to cure completely.

CSCT's better tile and grout care extends the life of your floors GUARANTEED.